เครื่องทดสอบแรงสปริง รุ่น S2 - แบบเสาเดี่ยว

S2 Systems

S2 systems single test frame are compatible with FMx Series Force Measurement Test Frames and FLC Load Cell Sensors.

Test Frames

FMx Series Force Measurement Frames

SpecificationsunitFMS-500FMS-1000FMS-2500FMS-5000FMD-10KFMD-30KFMD-50KLoad CapacityN50010002500500010,00030,00050,000Minimum Speedmm/min0.050.050.050.050.050.050.05Maximum Speedmm/min152515251525152515251525752Position Control

Resolutionμm0.2500.2500.2500.2500.050.0250.025Vertical Test Space*mm55995312571257127012451220Total Crosshead Travelmm38176210161016116211371111Throatmm100100100100424424424Accuracy

Load MeasurementLoad Cell Sensor DependentLoad Cell Sensor DependentLoad Cell Sensor DependentLoad Cell Sensor DependentLoad Cell Sensor DependentLoad Cell Sensor DependentLoad Cell Sensor DependentAccuracy

Position Measurement**(±20 μm)(±20 μm)(±20 μm)(±20 μm)(±20 μm)(±20 μm)(±20 μm)Accuracy

Crosshead Speed±0.1% of set speed±0.1% of set speed±0.1% of set speed±0.1% of set speed±0.1% of set speed±0.1% of set speed±0.1% of set speedData SamplingHz5 to 10005 to 10005 to 10005 to 10005 to 10005 to 10005 to 1000Digital I/O8 channels @ 1-5V8 channels @ 1-5V8 channels @ 1-5V8 channels @ 1-5V8 channels @ 1-5V8 channels @ 1-5V8 channels @ 1-5VOperating

Temperature°C+10° to +38°C+10° to +38°C+10° to +38°C+10° to +38°C+10° to +38°C+10° to +38°C+10° to +38°CStorage

Temperature°C-40° to +66°C-40° to +66°C-40° to +66°C-40° to +66°C-40° to +66°C-40° to +66°C-40° to +66°CHumidity+10% to +90%, non-condensing+10% to +90%, non-condensing+10% to +90%, non-condensing+10% to +90%, non-condensing+10% to +90%, non-condensing+10% to +90%, non-condensing+10% to +90%, non-condensingTotal Heightmm805121815731573168517111711Total Widthmm381381381381787787787Total Depthmm514514514514724724724Weightkg61778888136192225

*Total vertical space is the distance from the top surface of the base plate to the bottom surface of the crosshead, excluding load cell sensor, test fixtures, and clevis adapter.

**Assumes Linear Error Correction and Deflection Compensation has been performed on test frame.

Software Capabilities

Lx System

Lx System Product Comparisons and CapabilitiesTarget ApplicationsL3L2 PlusL2S2L1Use for Stress, Strain and Material Testing applications❍Use for Advanced Load, Distance and Force Analysis applications❍❍Use for Basic Load, Distance and Force Measurement applications❍❍❍❍Use for Advanced Extension and Compression Spring applications❍❍Use for Basic Extension and Compression Spring applications❍User InterfaceAll-In-On Computer Workstation, Windows® OS❍❍Tablet Computer, Windows® OS❍❍❍Software ApplicationsTest Builder❍❍❍✪Force Quick Test Templates❍❍Spring Quick Test Templates❍Formula Builder❍✪✪✪Automation Builder✪✪✪✪Measurement MethodologyMeasure results using the graph❍❍Measure results using a List of Value menu❍❍❍❍Create Test Setups using Graphical Test Methods (No programming)❍❍❍❏Create Test Setups using Quick-Test Templates❍❍❍Test MethodsTensile Testing, Load, Distance, Break, Rate❍❍❍❏❍Compression Testing, Load, Distance, Break, Rate❍❍❍❏❍Hold Testing, Load, Distance for Duration or Event❍❍❍❏❍Cyclic Testing for Duration, Count, Loop or Event❍❍❍❏❍Shear Testing❍❍Flexural Testing❍❍Peel Testing❍❍Coefficient of Friction Testing❍❍Spring Testing❍❍❍Measurement CapabilitiesMeasure Stress, Strain, Elongation, Strengths❍Measure Offset Yield❍Measure Modulus (Elastic, Chord, Tangent)❍Measure Strain and Elongation using Extensometer(s) (requires MMx test frames)❍Measure Energy, Work, Resilience❍❍Create Mathematical Expressions using Algebraic, Trigonometric and Logarithmic functions❍▷Create Basic Expressions using Add, Subtract, Multiple and Divide❍▷▷▷Use Digital I/O▷▷▷▷Use Analog I/O (requires MMx test frames)▷▷Use Command and Conditional Logic▷▷▷▷Measure Load, Distance, Time❍❍❍❍❍Measure Minimum, Maximum and Averages❍❍❍❍❍Measure Slopes and Intersections❍❍Measure Peaks, Valleys, Counts, Averages❍❍Measure Break, Rupture❍❍❍❏❍Measure Delta between results within a test❍❍❍Measure results within multiple test runs simultaneously (multiview)❍❍Measure Spring Rate, Spring Constant❍❍Reporting and Exporting DataPrint using standard reports, graph, batch, tolerance, statistics❍❍❍❍❍Export results/data in .csv for custom reporting❍❍❍❍❍Export results/data in .csv for integration with SPC software❍❍❍❍❍Include tolerances on any result❍❍❍❍❍

Note: FMM frames run L1 software only
L3, L2 Plus, L2 and S2 software require a FMS, MMS, FMD or MMD frame

❍ = Standard

✪ = Optional

❏ = Requires Test Builder application

▷ = Requires Automation Builder application

FLC Load Cell Sensors

Starrett offers a full range of precision load cell sensors for material testing, force analysis and force measurement applications. Starrett load cells are compliant with IEEE 1451.4 and meet or exceed ASTM E4, BS 1610, ISO 7500-1 and EN 10002-2.

Measurement accuracies of ±0.05% of reading down to 1/100 of sensor capacity may be achieved.

Three models of s-beam load cell sensors are also available. These are all full bridge, temperature compensated strain gage instruments, designed for force measurement applications, but suitable for some material testing applications.

FLC-P Series - "Premium" S-beam Sensors

Model Number

Load Capacity

(N / KGF / LBF)

Safe Overload

% Full Scale

FLC-5P5 / 0.5 / 11000FLC-10P10 / 1 / 21000FLC-25P25 / 2.5 / 51000FLC-50P50 / 5 / 111000FLC-100P100 / 10 / 221000FLC-250P250 / 25 / 561000

FLC Series - "Sealed" S-beam Sensors

Model Number

Load Capacity

(N / KGF / LBF)

Safe Overload

% Full Scale

FLC-500500 / 50 / 112150FLC-10001000 / 100 / 225150FLC-15001500 / 150 / 337150FLC-25002500 / 250 / 562150FLC-5K5000 / 500 / 1124150FLC-10K10,000 / 1000 / 2248150FLC-20K20,000 / 2000 / 4500150

FLC-E Series - "Economy" S-beam Sensors

Model Number

Load Capacity

(N / KGF / LBF)

Safe Overload

% Full Scale

FLC-50E50 / 5 / 11150FLC-100E100 / 10 / 22150FLC-200E200 / 20 / 45150FLC-500E500 / 50 / 112150FLC-1000E1000 / 100 / 225150FLC-2000E2000 / 200 / 450150FLC-2500E2500 / 250 / 562150FLC-5000E5000 / 500 / 1124150

Notes

Load measurement accuracy is ±0.1% of load cell capacity. Display resolution is 10,000:1.