DP - 920G
Gear Driven Inverter Variable Speed Drill Press
The DP-920G is a variable speed drill press with inverter gear driven head. It is equipped with a heavy MT#3 spindle taper. This drill brings you maximum 32mm (1-1/4") diameter mild steel.
Technical Specifications
Features
Download
DP-920G Drilling Machine (Gear Drive)
| Drilling Capacity(Steel) |
32mm (1-1/4") 40mm (1-1/2") (opt.) |
| Tapping Capacity |
19mm (3/4") Steel24mm (15/16") Cast Iron |
| Swing | 530mm (20-7/8") |
| Spindle Taper | MT3 / MT4 (opt.) |
| Spindle Travel | 150mm (6") |
| Quill Diameter | 75mm (3") |
| Column Diameter | 115mm (4-1/2") |
| Spindle Nose to Table | 850mm (33-1/2") |
| Spindle Nose to Base | 1160mm (45-11/16") |
| Table Size (L x W) | 560 x 470mm (22" x 18"-1/2") |
| Table Slot | 16mm (5/8") |
| Base Size (L x W) | 485 x 685mm (19" x 27") |
| Spindle (rpm) | High: 245~2000 Low: 65~540 |
| Motor | 2hp /3ph or 1ph - 1/8hp /3ph |
| Net Weight/ Gross Weight | 340/ 385 kg (748/8471b) |
| Machine Size (L x W x H) |
960 x 578 x 2030mm |
| Packing Size (L x W x H) |
940 x 648 x 1905mm (37-1/2" x 25-1/2" x 75") |
| Measurement | 42 cu.ft |