196 เกจวัดขนาดแบบหน้าปัด แกนวัดด้านหลัง
- แบรนด์: STARRETT (ประเทศสหรัฐอเมริกา)
- สำหรับการวัดขนาดหรือเปรียบเทียบระยะ ชิ้นงานรูปแบบพิเศษหรือตำแหน่งการทำงานที่พิเศษ
ข้อมูลทางเทคนิค
รายละเอียด
ดาวน์โหลด
| Cat No. | Range | Resolution | Accuracy | Dial Reading | Contents |
| 196MA1Z | 5 mm | 0.02 mm |
+/-0.02 mm/ +/-0.001” (one graduation) any where on dial Hysteresis-1 graduation |
0.001” | 1,2,3,4,A,B,C,G in case |
| 196MB1 | 5 mm | 0.02 mm |
+/-0.02 mm/ +/-0.001” (one graduation) any where on dial Hysteresis-1 graduation |
0.001” | 1,2,3,4 only |
| 196MA5Z | 5 mm | 0.02 mm |
+/-0.02 mm/ +/-0.001” (one graduation) any where on dial Hysteresis-1 graduation |
0-50-0 | 1,2,3,4,A,B,C,G in case |
| 196MB5 | 5 mm | 0.02 mm |
+/-0.02 mm/ +/-0.001” (one graduation) any where on dial Hysteresis-1 graduation |
0-50-0 | 1,2,3,4 only |
| 196A1Z | 0.2” | 0.001” |
+/-0.02 mm/ +/-0.001” (one graduation) any where on dial Hysteresis-1 graduation |
0.001” | 1,2,3,4,A,B,C,G in case |
| 196B1 | 0.2” | 0.001” |
+/-0.02 mm/ +/-0.001” (one graduation) any where on dial Hysteresis-1 graduation |
0.001” | 1,2,3,4 only |
| *196A6Z | 0.2” | 0.001” |
+/-0.02 mm/ +/-0.001” (one graduation) any where on dial Hysteresis-1 graduation |
0.001” | 1,2,3,4,A,B,C,G in case |
| *196B6 | 0.2” | 0.001” |
+/-0.02 mm/ +/-0.001” (one graduation) any where on dial Hysteresis-1 graduation |
0.001” | 1,2,3,4 only |
| 194A5Z | 0.2” | 0.001” |
+/-0.02 mm/ +/-0.001” (one graduation) any where on dial Hysteresis-1 graduation |
0-50-0 | 1,2,3,4,A,B,C,G in case |
| 196B5 | 0.2” | 0.001” |
+/-0.02 mm/ +/-0.001” (one graduation) any where on dial Hysteresis-1 graduation |
0-50-0 | 1,2,3,4 only |
| Cat No. | Description | Ref No | Cat No. | Description | Ref No |
| 196MR | Adapter (mm thread) | 1 | PT18718 | Snug complete | C |
| 196R | Adapter (4-48 thread) | 2 | PT18724 |
Snug complete – 1/4” and 3/8” hole |
D |
| PT05471 |
Hardness steel contact point |
3 | 57S | Universal snug | E |
| PT05472 | Hardness steel contact point | 4 | 58S | Universal snug | F |
| PT05473 | Hardness steel contact point | 5 | 196F |
Hole attachment for 196 and 96M only |
G |
| PT99437 | Clamp | A | PT08726A |
Shock absorbing anvil 196 and 196M only |
H |
| PT99438 | Tool post holder | B | PT00764 |
Split bushing for 196 and 196M only |
I |
ATTACHMENTS FOR 650, 651, 196 AND 196M BACK PLUNGER DIAL INDICATORS AND UNIVERSAL DIAL INDICATORS
- A. Clamp PT99437 With a 33mm / 1-5/16" flat or round capacity – 8mm / 5/16” post (PT03709-1/2) used with PT18718 Snug
- B. Tool Post Holder PT99438 9.5 x 19 x 150mm / 3/8” x 3/4” x 6”with upright spindle (PT03820-0) 8 dia. x 114mm length / 5/16" x 4-1/2”. Use with PT18718 Snug
- C. Snug Complete PT18718. Post hole has an 8mm / 5/16" diameterand 2.4 - 6.3 mm / 3/32-1/4" holding capacity. Can be used on our 252 Height Transfer Gauge, 57 and 257A and B Surface Gauges, on 657A Magnetic Base and Swivel Post Assembly
- D. Snug Complete PT18724. Post hole has a 9.5mm / 3/8" diameter and 2.4- 6.3mm / 3/32-1/4" holding capacity. Can be used with our 57 and 257C and D Surface Gauges or 657AA Magnetic Base with upright post
- E. Universal Snug 57S With spindle hole diameters 8, 9.5mm / 5/16", 3/8" and gripping hole diameters 3.5, 4, 4.8, 6.3mm / 9/64", 5/32", 3/16", 1/4”
- F. Universal Snug 58S. With spindle hole diameters 6.3, 8, 9.5mm / 1/4", 5/16", 3/8". Gripping hole diameters range from 2.4-6.3mm / 3/32-1/4" used on holders with smaller clamp hole
ATTACHMENTS FOR 196 and 196M ONLY
- G. Hole Attachment 196F allows indicator be used over obstructions and inside holes to a depth of approximately 40mm / 1-5/8”
- H. Shock Absorbing Anvil PT08726A
- I. Split Bushing PT00764. Allows attachment of 196 Indicator to 660 Magnetic Base